Identification; Unit Identification; Delivery Contents - Endress+Hauser iTEMP PCP TMT 181 Mise En Service

Identification

Unit identification

Delivery contents

22
Hazardous area, certified equipment:
If this character can be seen on the unit then it may be operated in hazardous areas.
Non-hazardous areas:
This symbol identifies the non-hazardous areas in these instructions.
Units that operate in the non-hazardous areas but that are connected to the
hazardous areas must also be certified.
2 Identification
2.1 Unit identification
Head transmitter legend plate
CE-marks, conformity description
The unit has been manufactured using up-to-date production equipment and has left
our works in perfect and safe condition. It complies with the safety requirements to
EN 61 010.
The unit described in these instructions therefore fulfils the legal requirements set by
the EU guide lines. The manufacturer confirms a positive completion of all tests by
fitting the unit with a CE mark.
2.2 Delivery contents
The delivery contents of a temperature head transmitter are as follows:
• Head transmitter
• Installation screws and springs
• Operating instructions
• ATEX-operating instructions for use in hazardous areas
Hint!
Please take note of the head transmitter accessories in chapter 9.
Order code (example)
Identification for hazardous area use
(only on Ex certified units)