Settings; Selecting The Operating Speed; Selecting The Closing Mode - Nice Home Filo Notice Simplifiee

Pour portails coulissants

Masquer les pouces

Table des Matières

Les langues disponibles

SETTINGS

6.1 - SELECTING THE OPERATING SPEED

To switch from high speed to low speed, briefly press button P2 (you can

read the status of LED L2: when lit, the gate is in fast mode, otherwise it

is in slow mode) (Fig. 23).

6.2 - SELECTING THE CLOSING MODE

To switch from the automatic mode to the semi-automatic mode, briefly

press button P3 (automatic closing if LED L3 is on, slow if it is off) (Fig. 24).

UE Declaration of Conformity

and declaration of incorporation of "partly completed machinery"

Note - The contents of this declaration correspond to that stated in the official document filed in the offices of Nice S.p.A. and, in particular, the latest version thereof available prior to the print-

ing of this manual. The text herein has been re-edited for editorial purposes. A copy of the original declaration can be requested from Nice S.p.A. (TV) Italy.

Number: 579/FILO

Manufacturer's name:

Address:

Person authorised to draw up

technical documentation:

Product type:

Model / Type:

Accessories:

The undersigned, Roberto Griffa, as Managing Director, hereby declares under his own responsibility that the product identified above complies with the provisions

of the following directives:

• DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9 March 1999 on radio equipment and telecommunications terminal equip-

ment and the mutual recognition of their conformity, in accordance with the following harmonised standards:

– Health and safety (Art. 3(1)(a)): EN 62479:2010

– Electrical safety (Art. 3(1)(a)): EN 60950-1:2006+ A11:2009+A12:2011+A1:2010+A2:2013

– Electromagnetic compatibility (Art. 3(1)(b)): EN 301 489-1 V2.2.0:2017,, EN 301 489-3 V2.1.1:2017

– Radio spectrum (Art. 3(2)): EN 300 220-2 V3.2.1:2018

In addition, the product conforms to the following directive in accordance with the provisions applicable to "partly completed machinery":

• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 regarding machines and amending directive 95/16/EC (consolidated text)

– It is hereby declared that the relevant technical documentation has been compiled in accordance with Annex VII Part B of Directive 2006/42/EC and that the follow-

ing essential requirements have been applied and fulfilled: 1.1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11

– The manufacturer agrees to transmit to the national authorities any pertinent information on "partly completed machinery", in response to a motivated request,

without prejudice to its intellectual property rights.

– Should the "partly completed machinery" be commissioned in a European country with an official language different to the one used in this declaration, a translation

into that language accompanying this declaration must be provided by the importer.

– The "partly completed machinery" may not be commissioned until the final machinery into which it is to be incorporated has been declared to conform to the provi-

sions of Directive 2006/42/EC, where appropriate.

The product also complies with the following standards: EN 60335-1:2012+A11:2014, EN 60335-2-103:2015, EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011.

Oderzo, 03/05/2019

Revision: 3

Language: EN

NICE S.p.A.

Via Callalta n°1, 31046 Oderzo (TV) Italy

NICE S.p.A.

24 VDC gearmotor for sliding gates with incorporated receiver and control unit

FILO400C, FILO600C

Refer to the catalog

semi-automatic