Flips And Loops; Circle Mode; Headless-Function - Carson X4 Quadcopter Nano Cage Manuel D'instructions

FLIPS AND LOOPS

When you have familiarised yourself with the basic flight
manoeuvres and are moving safely in the air, you can then
check out the aerobatic characteristics of the X4 quadcopter.
Manoeuvre the model at a height of at least 3 m. Press the
aerobatics button (see fig.). Now move the right control stick
(forwards, backwards, right or left). The model performs a loop
in the given direction.

CIRCLE MODE

Addition functions of your model can be enabled during flight.
With the buttons on the left and right of the transmitter, you can make the model turn automatically.
1
When this button is pressed once, the quadcopter turns on its own
axis. Pressing the button again disables this function.

HEADLESS-FUNCTION

The headless function allows for a more simplified control of the
Quadcopter, where all control commands use the position of the
pilot as their reference point. Therefore, the Quadcopter always
operates from the pilot's perspective, i.e. left and right cannot be
swapped around when the model turns.
This simplification makes the control much easier for beginners.
Front
activate Headless Mode
Left Right
Rear
(NOTE!! not available in headless mode)
Rear
Left
Front
2
When this button is pressed once, the quadcopter circles in a wider
radius. Pressing the button again disables this function.
• After switch on, the standard control function
is always activated.
• Press the headless button / LEDs on quad-
copter flash
• Headless function is activated
De-activate Headless Mode:
• Press headless button again / LEDs are conti-
nuously lit
• Headless function is de-activated
Right
Fly back function (in headless mode):
Press the selection button (fig. 1). The model will automatically fly
back to you. With the joy stick (fig. 2), you control the direction of
the model.
1
23 // GB
2