Special Function Explanation; Flips Und Loops; Flips And Loops - Carson X4 Quadcopter 270 Backflip Manuel D'instructions

SpecIaL FunctIon expLanatIon

headless - Function
The Headless-function allows simplified control of a quadcopter, in which all control commands as use the reference point the location
of the pilot. Here, it is no longer necessary, the position and orientation of the model taken into account. A feature which may be a bit
confusing for experienced pilots, beginners, however, it facilitates control significantly.
Switch to headless function and general function
Front
Left Right
Back

FLIpS unD LoopS

Flips and loops

If you make moored with the basic flight maneuvers, you can check out the acrobatic flight characteristics of the X4 quadcopter. Climp up
to a height of at least 3 meters.
180° Flip
1. You can use the „flip selector switch" to choose between 180° (2x beeps) and 360°(1x beep) flips.
headless
function
Front
Left Right
Back
360° Flip
1. When the model is first switched on, the normal control func-
tion is activated. The LED glows permanently. Once the headless
function switch on the transmitter is pushed, you will hear a
beep „D....". This means that the headless function is activated.
Press the button again. You will hear another beep „D" to indi-
cate that the headless function has been switched off. (the LED
glows 3x in headless mode)
2. In headless state, the operator has no need to recognize the
position of aircraft's headpiece, and he just needs to control
the aircraft in accordance with the direction of remote control's
operating rod.
2. Activate the „Flip Mode" by
pushing the right control
knob vertically down. You
will hear a continuous beep
„DDD..." Now move the
right control stick (forwards,
backwards, right or left). The
model performs a loop in the
given direction.
27 // GB