Your 4-Channel Rc Transmitter; Inserting Batteries; Charging The Lipo Flight Battery - Carson X4 Quadcopter Nano Cage Manuel D'instructions

YOUR 4-CHANNEL RC TRANSMITTER

Explanation of transmitter
Fly back function
Beginner / Pro mode
Throttle control + control joystick
for rotation / headless function
On/Off switch

INSERTING BATTERIES

1.
2.

CHARGING THE LIPO FLIGHT BATTERY

The quadcopter is fitted with a LiPo battery.
1. The supplied LiPo battery is stored in the body of the quad-
copter.
2. Connect the battery of the quadcopter to the connector of the
USB charger. The indicator light on the USB plug is glowing
during the charging process. The light goes out again once
charging has finished.
Do not leave the copter or the charger unattended during the
charging process and always disconnect the battery from the
charger after completion! While charging, place the battery and
charger on a fireproof base!
• Charging time is about 45-60 min.
(max. transmitter power: 10 mW)
Circle
mode
3.
Circle Status
mode indicator
Trim
Right control joy stick
(forwards/backwards/left/right) /
flips & loops
Attention
• Never mix used and new batteries.
• Never use batteries of different types together.
• Do not attempt to charge non-rechargeable batteries.
Insert fresh AA Mignon batteries with the correct polarity in the
battery compartment.
LR03 AAA
LR03 AAA
19 // GB