Black & Decker FX400 Mode D'emploi page 4

ENGLISH
Intended use
Your Black & Decker appliance comes with 7
accessories* to perform below functions:
Stainless Steel blade for chopping, beating,
creaming, crumbling, cutting, folding in,
mashing, mincing and mixing.
Shredding and Slicing disc for grating and
shredding vegetables, fruits and cheese. The
reverse side of this disc is used for cutting and
slicing vegetables and fruits.
Fanned disc for whisking, whipping and
emulsifying.
Separate blade for kneading dough.
** Blender for blending, crushing, foaming,
grinding, pureeing, homogenizing, liquidizing,
milling, shaking and stirring.
**Grinder mill for grinding coffee, herbs and
spices.
** Mincer mill for mincing meat and chopping
vegetables
Do not use this appliance for any other purpose.
This product is intended for indoor household
use only.
*7 accessories with model FX400BMG
**These accessories are available with model
FX400BMG
Read this entire manual carefully
before using the appliance.
Safety instructions
• Warning! When using mains-powered
appliances, basic safety precautions,
4
including the following, should always be
followed to reduce the risk of fire, electric
shock and personal injury.
• The intended use is described in this manual.
The use of any accessory or attachment or
the performance of any operation with this
appliance other than those recommended in
this instruction manual may present a risk of
personal injury.
• Retain this manual for future reference.
Using your appliance
• Always take care when using the appliance.
• Never pull the power supply cord to
disconnect the plug from the socket. Keep the
power supply cord away from heat, oil and
sharp edges.
• Do not place the appliance on or near heat
sources or in a heated oven.
• Do not use the appliance outdoors.
• Always protect the motor unit from water or
excessive humidity.
• If the power supply cord is damaged during
use, disconnect the appliance from the power
supply immediately. Do not touch the power
supply cord before disconnecting from the
power supply.
• Disconnect the appliance from the power
supply when not in use, before fitting or
removing parts and before cleaning.
• Never let the appliance operate unattended.
• Never reach into the jar with your fingers or
an object while the appliance is running.