Bosch WC18C Consignes De Fonctionnement/Sécurité page 12

2610035860_WC18C 8/25/14 8:43 AM Page 12
Side Mount Instructions
The holster may be mounted to shelf or
workbench side walls through the side
mounting holes using the hardware provided
(Fig. 11).
1. Determine desired mounting position and
orientation. Holster may be mounted from
either its left or right side. See Fig. 12a
for acceptable mounting positions.
2. If mounting holes are not available, mark
and pre-drill holes for side mounting bolts.
Side mounting bolt spacing is 10 inches
(254mm).
FIG. 11
BOTTOM
SIDE MOUNTING
HOLE
NUT*
m )
4 m
( 2 5
0 "
R 1
HOLE B
* Hardware included with holster
-12-
3. Remove Bolt 1 (Fig. 10a) from bottom
side mounting hole.
4. Attach holster to wall as shown in Fig. 11
Fasten holster securely to
W RNING
side walls.
securely fastened may become dislodged
and lead to personal injury
Mount holster in only
W RNING
r e c o m m e n d e d
orientations. Failure to properly orient
holster may cause holster and/or power tool
to become dislodged and lead to personal
injury.
W LL
HOLE
Holster not
HOLSTER
TOP
SIDE MOUNTING
HOLE
W SHER*
SIDE
MOUNTING
BOLT* (2x)