Leister TWINNY T Instructions D'utilisation page 11

Operating Instructions
Please read operating instructions carefully before use
and keep for future reference.
Leister TWINNY T
Combination wedge automatic hot air welding machine
Application
The Leister TWINNY T is a combination wedge automatic hot air welding machine for overlap welding and
manufacturing of films and geomembrane liners in tunnels as well as in earthwork and civil engineering.
The heat transmission occurs through optimum combination of contact and hot air.
Warning
Caution
230
400
FI
(Translation of the original operating instructions)
Danger! Unplug the tool before opening it as live components and connections
are exposed.
Incorrect use of the hot air tool can present a fire and explosion hazard
especially near combustible materials and explosive gases.
Do not touch the element housing and hot wedge when hot as they can cause
burns. Allow the tool to cool down. Do not point the hot air flow in the direction of
people or animals.
Connect the tool to a socket outlet with a protective earth conductor.
Any interruption of the protective earth conductor inside or outside the tool is
dangerous! Use only extension cables with a protective earth conductor!
The voltage rating stated on the tool should correspond to the mains voltage.
= 0.105 Ω + j 0.066 Ω. If necessary, consultate supply
EN 61000-3-11; Z
max
authority.
Extract hot-air blower in case of power breakdown.
For personal protection, we strongly recommend the tool be connected to an
RCCB (Residual Current Circuit Breaker) before using it on construction sites.
The tool must be operated under supervision.
Heat can ignite flammable materials which are not in view.
The device machine may only be used by qualified specialists or under their super-
vision. Children are not authorized to use this device.
Protect the device from damp and wet.
GB
11