Xiaomi Mi Robot Vacuum-Mop Essential Manuel D'utilisation page 17

Cleaning the 2-in-1 Dust Compartment with Water Tank
1. Open the cover of the vacuum-mop, then pinch the
clips on both sides of the 2-in-1 dust compartment with
water tank, as shown in the figure.
2. Take out the filter assembly, then remove the filter and
sponge filter to clean them.
3. Empty the contents of the dust compartment. Clean the
compartment using the cleaning brush, then align and reinstall
the filter.
4. Reinstall the 2-in-1 dust compartment with water tank into
the vacuum-mop until it clicks into place, then close the cover
of the vacuum-mop.
15