How To Use - Xiaomi Mi Robot Vacuum-Mop Essential Manuel D'utilisation

How To Use

1. Before use
Remove the protective foam strips from both sides, and peel
the protective film off the collision sensor.
2. Connect to the power supply
Open the bo om cover of the charging dock. Connect the power
cord, and wrap any excess cord around the spool on the bo om
of the dock, then remove the protective film from the IR sensor.
3. Place the charging dock on the level ground
against a wall.
4. Turn on and charge the vacuum-mop. Press
and hold the bu on "
on the vacuum-mop. When the indicator lights
up, manually place the vacuum-mop onto the
charging dock to charge.
09
" for 3 seconds to turn