Connect With Mi Home/Xiaomi Home App - Xiaomi Mi Robot Vacuum-Mop Essential Manuel D'utilisation

Connect with Mi Home/Xiaomi Home App

This product works with Mi Home/Xiaomi Home app. Control your device with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the connection setup page if the app
is installed already. Or search "Mi Home/Xiaomi Home" in the app store to download and install it.
Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should
be taken as the default.
Note: The version of the app might have been updated, please follow the instructions based on the current app version.
Rese ing Wi-Fi Connection
When switching to a new router or changing your Wi-Fi password, you will need to reset the vacuum-mop's Wi-Fi connection. To
do so, turn on the vacuum-mop, then simultaneously press and hold the bu ons "+" and "
a voice saying "Rese ing the Wi-Fi connection and entering network configuration mode". Once the Wi-Fi connection is reset,
follow the in-app prompts to add the device.
Note: Only 2.4 GHz Wi-Fi networks are supported.
Restoring Factory Se ings
Press and hold the Dock bu on "
seconds. Separate voice prompts will indicate when the reset begins and a er it is completed. Restoring factory se ings will clear
all user data.
" for 5 seconds. Upon hearing a voice message, press and hold the Dock bu on again for 5 more
08
" " " for 3 seconds until you hear