Motorola DLR120 Mode D'emploi page 84

English
If... Then...
Message not Ensure that the PTT button is com-
transmitted or pletely pressed when transmitting.
received
Confirm that the radios have the
same settings and PROFILE ID. En-
sure that radios are on the same
channel.
Ensure that you hear the Talk Per-
mit Tone before talking. Speaking
before hearing the tone results in
cytting out the first few words of the
transmission. Refer to
and Receiving on page 27
ther information.
Recharge, replace and/or reposition
the batteries. See
tery on page
Obstructions and operating indoors,
or in vehicles, may create interfer-
ences. Change locations. See
Transmitting and Receiving on page
27.
84
Transmitting
for fur-
About Li-Ion Bat-
15.
If... Then...
Heavy static or Radios are too close; they must be
interference at least five feet apart.
Radios are too far apart or obsta-
cles are interfering with transmis-
sion.
See Transmitting and Receiving on
page 27.
Low batteries Recharge or replace Li-Ion battery.
Extreme operating temperatures af-
fect battery life.
See About Li-Ion Battery on page
15.
Drop-in Charger Verify that the radio/battery is prop-
LED light does erly inserted and check the battery/
not blink charger contacts to ensure that they
are clean and charging pin is insert-
ed correctly.
Refer to
Tray Single Unit Charger (SUC) on
page 19,
Charging with the Drop-In
Radio Status on page 30