Motorola DLR120 Mode D'emploi page 183

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Français (Canada)
If...
Then...
Message not
Ensure that the PTT button is
transmitted or
completely pressed when
received
transmitting.
Confirm that the radios have the
same settings and PROFILE ID.
Ensure that radios are on the same
channel.
Ensure that you hear the Talk
Permit Tone before talking.
Speaking before hearing the tone
results in cytting out the first few
words of the transmission. Refer to
Émettre et recevoir à la page 28
further information.
Recharge, replace and/or reposition
the batteries. See
batterie au lithium-ion à la page
Obstructions and operating indoors,
or in vehicles, may create
interferences. Change locations.
See
Émettre et recevoir à la page
28.
92
If...
Heavy static or
interference
Low batteries
for
Drop-in Charger
LED light does
À propos de la
not blink
15.
Then...
Radios are too close; they must be
at least five feet apart.
Radios are too far apart or
obstacles are interfering with
transmission.
See
Émettre et recevoir à la page
28.
Recharge or replace Li-Ion battery.
Extreme operating temperatures
affect battery life.
See
À propos de la batterie au
lithium-ion à la page
15.
Verify that the radio/battery is
properly inserted and check the
battery/charger contacts to ensure
that they are clean and charging pin
is inserted correctly.
Refer to
Charge de la batterie avec
le support de charge pour unité
simple DLR (SUC) à la page
État de la radio à la page 32
20,
and

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Dlr1060

Table des Matières