Talking To A Group In A Channel; Browsing Or Selecting A Channel; Private Reply; Dlr And Dtr Radios Compatibility - Motorola DLR120 Mode D'emploi

English
NOTICE:
To ensure that your words are not cut off, always
wait for the TPT before you start to speak.

Talking to a Group in a Channel

Press the PTT (Push to Talk) to transmit. Solid Red Tx/Rx
Indicator LED when transmitting and wait to hear the Talk
Permit Tone (TPT) before you start speaking.

Browsing or Selecting a Channel

1 To select a channel, press the Channel/Menu
button until the voice announcement "Channel
<Number>, to change press + or -.
2 To select the desired channel, press (+) or (-)
buttons.
An audible voice indicates the selected channel.
3 To exit <Channel Change>, press the PTT button
or wait for the radio Channel/Menu timer to expire.
5
DLR CPS software is available for free download at www.motorolasolutions.com/DLR.
28

Private Reply

This section explains the function of Pivate Reply.
the Private Reply feature is enabled by default. For
example, when you hear someone talking on the radio,
push the Top button to queue for Private Reply function
(Top button LED indicator blinks orange). After the person
finishes talking, press the PTT button to reply privately to
that person (Top button LED illuminates solid orange).
Voice prompts and tones guide you on the status of the
private call. For instructions for using this feature, see
Special Radio Call Features on page

DLR and DTR Radios Compatibility

DLR and DTR radios are based on the same digital radio
technology and can be used in mixed fleets of DLR and
DTR radios. Out of the box, DLR, and DTR radios
communicate using the factory default settings.
If you have DTR radios with customized settings and/or
private groups, and need to add DLR radios, make sure to
use the DLR CPS software
configuration in the DLR radios. The same applies if DTR
radios are to be added to an existing DLR radio fleet. For
44.
5
in order to create a compatible