Charging A Stand-Alone Battery - Motorola DLR120 Mode D'emploi

English
NOTICE:
For more information, see
Charger LED Indicators on page 22
Operational Safety Guidelines on page
The red LED on the SUC illuminates to indicate that
the battery is charging.

Charging A Stand-Alone Battery

To charge a battery, insert the battery into the
charger pocket.
20
DLR Series
and
11.
2
1
a Aligning the raised tab on each side of the battery
with the corresponding groove on each side of
the charger pocket.
b Pressing the battery toward the rear of the
pocket.
c Sliding the battery into the charger pocket,
ensuring complete contact between the charger
and battery contacts.
When the battery is properly seated in the pocket,
the charger indicates the Battery Level status as
shown in DLR Series Charger LED Indicators on
page 22 table. The red LED blinks to indicate that
the battery is charging rapidly. The LED changes to
a steady green light to indicate that the battery is
nearly or fully charged.