Cloning Mode - Motorola DLR120 Mode D'emploi

Cloning Radios
You can clone radio profiles from one Source radio to a
Target radio by using any one of these four methods:
• Using a Multi-Unit Charger (MUC- optional accessory)
• Using two Single Unit Chargers (SUC) and a Radio-to-
Radio cloning cable (optional accessory)
• Using CPS (free software download)
• Using Wireless PIN cloning

Cloning Mode

Power up using the Power button while pressing the PTT
and (-) buttons simultaneously. Radio sounds cloning mode
beeps followed by the voice prompt "Cloning Mode, Serial"
to set your radios into Cloning Mode.
1
3
2
Label Item
1 Power button
2 (-) button
3 PTT button
English
75