Garland 1190 QG Manuel D'instructions page 26

English
ÍNDEX
1. Introduction
2. Normative and security measures
3. Warning signs
4. Machine symbols
5. Machine description
6. Start up instructions
7. Machine usage
8. Maintenance and service
9. Troubleshooting
10. Transport
11. Storage
12. Recycling and machine disposal
13. Warranty conditions
CE Declaration of conformity
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Ref.:BICHIPPER1190QGV17M0717V1
DATE OF PUBLICATION: 25/07/2017
DATE OF REVISION: 17/08/2017
1. INTRODUCTION
26
Thank you for choosing this Garland machine. We
are confident that you will appreciate the quality and
27
performance of this machine, which will facilitate your
task for a long period of time. Remember that this
31
machine has the most extensive and expert technical
assistance network which you can consult for the
32
maintenance, troubleshooting and purchase of spare
parts or accessories.
33
Warning! Read all safety warnings and
35
all instructions. The failure to observe all
warnings and instructions below can result in fire and/
39
or serious injury. Before using this machine, carefully
read the information in this manual on correct setup
41
and safe techniques.
46
The chipper is only designed to shred pieces
of wood with a maximum diameter of 6cm. It is
47
prohibited to shred any other material (for example
metal, stones, plastics and any other material). If
47
you want to shred roots, remove the sand, mud or
other residues before shredding. Any other use of
47
the shredder not described here, annuls the warranty
responsibility of the manufacturer.
48
Save all warnings and instructions for future
49
reference. If sold in the future, remember to give this
manual to the new owner.
Remember that the machine operator is responsible
for the damages and accidents caused to other people
or things. The manufacturer will not be liable in any
way for damages caused by improper or incorrect use
of this machine.
26/148