Preparation; Packing Content; Site Requirements; Ambient Operating Conditions - Mettler Toledo GPro 500 Guide D'installation Rapide

Quick Setup Guide TDL GPro™ 500

1 Preparation

Packing content

Site Requirements

Ambient operating
conditions

What you also need

– GPro™ 500 Tunable Diode Laser Analyzer
– 1 Safety Instruction
– 1 Documentation CD with Instruction manual and MT-TDL Software Suite.
– 24 VDC, 5 W for power supply of the GPro™ 500
– 110 / 220 VAC for the power supply of M400
– Purge gas, > 99.7% purity (minimum recommended), 0.5...5 L /min.
The purity requirements are:
conform to standard set by ISO 8573.1, class 2–3, analog to instrument air.
For oxygen TDL, nitrogen or any other "O
used.
– 20...+ 55 °C (– 4...+ 131 °F) during operation
• 1 M400 T3 Transmitter (p / n 52121350)
• 1 Ethernet cable CAT5
• RS 485 cable (< 250 m)
• 1 Laptop (WinXP / 7 / 8) with MT-TDL software installed
• Flat gasket 82.14 3 3.53 mm
• Check valve
• 2 pcs open-end wrenches (spanners) for M16 bolts
• 1 pcs Allen key 5 mm for the locking screws on flanges and Tx lid screws
• 1 pcs Allen key 3 mm for the RS 232 cover screws
• 2 Flat keys for Swagelok
• 1 pcs flat screwdriver 2.5 mm for electrical connections
• 1 pcs flat (6 mm) or cross head (No 2) screwdriver for Rx lid screws
• Adjustable wrench (spanner) for purge connections
• Torque wrench for FM version
free" clean and dry gas can be
2
5