Amprobe BEHA- LT-10 Mode D'emploi page 9

Find Quality Products Online at:
1
2
Attaching and Removing the Adapter Plate
LAMP TEST
• Verify lamp test function on a known lamp and/or on the identical
lamp model both before and after use to ensure the instrument is in
good working condition.
• On a very few particular linear fluorescent types, testing against the
glass surface of the lamp may not respond. Testing on the lamp socket
pin via the instrument's probe (direct metal-to-metal contact) shall
allow good lamp response from a working lamp.
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com