Publicité
Les langues disponibles
Les langues disponibles
Radio Reception
Seek Tuning
1.
Press the
to select the desired band.
F1(FM 1)
F2(FM 2)
F3(FM 3)
(FM 3 & MW2 are Travel Store bands.)
2.
Press the
or
to tune in stations. Tuning au-
tomatically stops at a broadcasting frequency.
When tuned in to FM stereo broadcasting stations, the
" ST " will appear on the display window.
:
.
Lower Frequency
:
Higher Frequency
.
Manual Tuning
1.
Press the
to select the desired band.
2.
Press and hold the
or
ond to activate the manual tuning mode (1kHz step).
R-ch/L-ch Level Meter will light on the display window.
Press again to tune in to stations.
After 4 seconds of completing Manual Tuning, the tuning
control will revert to the Seek Tuning mode.
Scan Tuning
1.
Press the
to select the desired band.
2.
Hold the
pressed for less than 2 seconds.
The unit will scan the selected band for stations and the
unit will stop at each receivable station for 10 seconds,
before continuing to the next station.
Press the
again to stop Scan Tuning and remain
this on the selected frequency.
Preset Scan Tuning
1.
Press the
to select the desired band.
2.
Hold the
pressed for more than 2 seconds. The
E-6
unit will scan preset memory for the each 6 stations from
the MW band or the 18 stations from the FM bands. The
unit will stop at each receivable station for 10 seconds,
before continuing to the next preset station.
M1(MW1)
M2(MW2)
Press the
remain this on the selected frequency.
Memorizing Stations Automatically (Travel Store)
1.
Press the
2.
Hold the
Up to 6 stations will be automatically stored in preset
memory for the selected band.
If the radio is in FM 1 or FM 2, it switches to FM 3.
If the radio is in MW1, it switches to MW2
Note
This function is available for FM 3 and MW2.
for more than 0.5 sec-
Memorizing Only the Desired Stations
You can store up to 6 stations on each band (18 for FM, 12
for MW) in the order of your choice.
1.
Press the
2.
Press the
3.
Press and hold the desired preset memory button
6
for about 2 seconds until the frequency indicator
flashes twice.
The number of the pressed preset memory button ap-
pears on the display window.
Note
If when you store another station on the same preset number
button, the previously stored station is replaced with new one.
Receiving the Memorized Stations
1.
Press the
2.
Press the
again to stop Preset Scan Tuning and
to select the desired band.
pressed for longer than 2 seconds.
to select the desired band.
or
to tune in stations.
to select the desired band.
1
6
-
momentarily.
Tape Operations
Listening to Tape Playback
Inserting a Cassette
Insert a cassette to start playback. Playback begins automati-
cally.
Changing the tape direction
Press both
and
at the same time, to change the
FR
FF
tape direction.
Ejecting the cassette
Press the
to stop playback and eject the cassette.
Fast Forward / Rewind
Press the
or
until it is locked.
FR
FF
To resume playback, press the opposite direction button half-
way to release the locked button.
1
-
Note
• Before turning off the unit, eject the tape to avoid tape
damage.
Publicité
