Windsor Treadway Instructions page 11

Cleaning operations
Danger
Risk of injury and electrical shock! Always
lay the extension cable in such a way that it
does not get jammed or crushed and also
does not cause somebody to stumble over it.
Plug in the main plug.
Insert the end of the extension cable as
a loop in the strain relief clamp.
Lock the rear wheels.
Place the machine on the platform in
such a way that the front wheels do not
touch the first step of the moving travel-
lator/ escalator.
Press pedal for lowering the brush head.
Brush head is lowered.
Press the foot pedal with one foot and
while doing so move the machine a little
back and forth towards the side. The ma-
chine will position itself centrally in the
grooves of the steps; you will then hear a
rustling sound.
Danger
Risk of injury! Do not push the appliance
onto the escalator any further than the indi-
cations given below. Otherwise, the machi-
ne will get dragged off by the escalator. In
case of danger, immediately press the emer-
gency stop switch of the escalator.
The cleaning head must lie flat on the esca-
lator.
Set the appliance switch to regular or ba-
sic cleaning.
The machine is started.
Note
The machine switches off when the dirty wa-
ter reservoir is full. To restart the machine,
empty the dirty water reservoir and briefly
set the appliance switch to "0".
Continue cleaning until the travellator/
escalator has completed 1 or 2 rounds.
Then move the machine towards the
side and start a new cleaning process.
11
English