Hilti PR 30-HVS A12 Mode D'emploi page 22

To save the settings, switch the laser receiver off.
Fig. 1: Measuring unit system and units
• Please refer to the description of the unit system and how to set the units.
Fig. 2: Software version
• Shows the current software version; no settings can be made.
Fig. 3: Sleep mode
•
Use the units button to set the mode to on or off.
The status set is highlighted in black.
Fig. 4: Inclination units
•
Use the units button to set the units to be used.
You can choose between inclination in % and inclination in °.
Fig. 5: Pairing with a rotating laser
•
Status shown: The PRA 30 and the rotating laser are paired
To cancel the pairing: Select
The status set is highlighted in black.
Fig. 6: Pairing with PRA 90
•
Status shown: PRA 30 and PRA 90 are paired
To cancel the pairing: Select
The status set is highlighted in black.
Fig. 7: Shock warning sensitivity
•
Use the units button to set the sensitivity.
The choice is: High sensitivity (top); Medium sensitivity (middle); Low sensitivity (bottom).
16 English
.
.
.
.
2134493
*2134493*
Overview of the menu