Rollei Funk Blitzsender Mode D'emploi page 47

3. Setting emitter flash group by
wireless flash function menu
Group pilot lamp and channel pilot lamp is
on by wireless flash function menu group .
When the pilot twinkles, it means you can
choose the group .
4. Setting light ratio
1. All (A+ B+ C)
Light ratio is off, group A,B,C will keep
the same power . You also can set the
flash exposure compensation .
2. A:B
Group A,B setting light ratio (8:1-1:8,1/2
step) and flash exposure compensation,
the group C doesn't flash .
3. A:B C
Group A,B setting light ratio and flash
exposure compensation, group C is
separated to set flash exposure compen-
sation (Group C available for backgroud
light) . If group C is the master light, it
will be over exposed) .
47
1
2
3