Parts Info - Rollei Funk Blitzsender Mode D'emploi

Parts Info

36
On/Off Switch:
• Power switch: Sliding to [ON]
to turn on the power
• Sliding to [OFF] to turn
off the power
Hot shoe
Mode button (MODE)
Flash test button (TEST)
Group settings button (A / B / C)
Status indicators
1
Interface: Used for updates
Battery compartment: install 2 AA batteries
ENGLISH
2 3
Connect to the camera hot shoe
Transmitter Mode Selection
Set the trigger to send the flash signal
packet
A packet enters or exits the flash
parameter settings
Power, wireless communication
or command indicator
1
Standby mode (Red flashing)
2 Camera communication state
(Green flashing)
3
Test status (Green red normally on)