Rollei Funk Blitzsender Mode D'emploi page 44

2 . In the non- group settings, press the [Left] or [Right] button to set the main light
44
exposure compensation, – 3 . 0 ~ 3 . 0EV, 0 . 3EV each a fine- tuning .
Press the [Up] and [Down] button to set the flash ratio, respectively,
in "all", "A:B" and "A:BC" .
Flash ratio "All" means three slave groups have the same light output . Set the
exposure compensation and bracketing (Camera menu settings) and select the
flash ratio . If it is "A:B" this indicates open A, group B and flash . You can set the
brightness AB output ratio . If the selected flash ratio is " A: B C" it represents the
three groups are open flash and set the AB output ratio and brightness of group C
power compensation .
3 . Set the flash light ratio (A:B or A:B C) .
Press the small arrow in the five- way button group to set the flash ratio shown
before the lights . Press [Left] and [Right] button to set the flash intensity ratio .
4 . Setting Group C Exposure Compensation (A:B C)
Press the 5 key groups in the [Middle] arrow key to a small group C before the
lights . Press [Left] and [Right] button to set the group C exposure compensation
value . The setting is completed continue by pressing the [Middle] button to
confirm and exit .
ENGLISH