Functional Description - Rollei Funk Blitzsender Mode D'emploi

Functional Description

38
Turn on
Insert the batteries into the transmitter and turn the power switch to „ON" . Then
the LCD screen, the backlight and the double colour status indicator light lit at the
same time . The system self-check as well as a complete initialization will be done .
Standby mode will be entered and the red light will be flashing .
Mode selection
If the transmitter is turned on, press the [MODE] button to change between the
different modes: Canon master TTL mode, Canon Master M mode, Canon Multi
Master mode as well as Nikon Master Mixed Mode . There are 5 modes to achieve
different flash effects .
Flash
Press the transmitter flash [TEST] button, to test whether the flashes of the same
channel will get all kind of mode and parameter information . There you can see if
they are working correctly .
Backlight
Push any button of the transmitter and the backlight will be lit . If the transmitter is
in standby, the backlight will automatically shut down after 10 seconds .
Restore factory settings
Press the Set/ restore factory setting button to
restore to factory settings .
ENGLISH