Preparation - Rollei Funk Blitzsender Mode D'emploi

Preparation

Insert the batteries
Open the battery compartment according to the ar-
rows shown on the picture . Install two AA batteries
and close the battery compartment again .
If the product is not used over a long period of time,
please remove the batteries . If the batteries need
to be replaced always replace the two batteries
together .
Mount the transmitter on the camera hot
shoe
1 . Unlock the transmitter hot show by pushing the
ring to the left side .
2 . Put the transmitter feet completely into the hot
show of the camera .
3 . Lock the transmitter on the hot shoe of the
camera by pushing the ring to the right side .
37