Basic setup
Before using the telephone the first time,
the following basic settings should be made.
After confirming a setting, the next setting is
automatically displayed. To skip to the next setting,
press
.
The phone will return to standby mode after 30
seconds of inactivity or when pressing
On first setup the display clock will show
1.
Press and hold * for about 5 seconds until the
hour flashes.
Use v / V to change the value and confirm
2.
with
3.
Repeat steps 1– to set the minutes, day and
month.
ENGLISH
is displayed.
Use v / V to select the desired language for
display and voice function, then confirm with
VOICE ON
Use v / V to set the voice function ON or OFF
and confirm with
When ON, a recorded voice is played with key
presses and alert messages.
.
.
English
3
.
00:00
.
.