Doro SeePlus 314ci Mode D'emploi page 24

Registering a cordless remote unit
1. Press and hold the Pairing button on the bottom
of the phone. The display shows
2. Press the button on the cordless remote until the
display shows
3. Release the Pairing button.
Check with trial tests that all cordless alarm units in with trial tests that all cordless alarm units in
use are working.
Changing batteries in the cordless remote
If the cordless remote unit ceases to function,
change the batteries in the unit.
1.
Use a Phillips screwdriver to loosen the screw on
the back and separate the parts by gently turning
a flat screwdriver in the groove on the underside.
2.
Exchange the 1V battery for a new one
following the markings for plus and minus
terminals.
3.
Reassemble the parts and screw together.
External alarm switch
An external alarm switch can be connected to a
3.5 mm mono socket on the back of the telephone.
The external alarm switch will function in the same
way as the cordless remote.
English
OK
.
that all cordless alarm units in
19
PAIRING
.