SSS Siedle plug+play BVNG 650-0 Mode D'emploi page 8

Prog. mode
Activation of the programming
mode.
PRI 602 USB
Plug-in facility for ZBVG 650-...
Programming the In-Home bus via
PC. Interface PRI 602-... USB is
required for programming.
Display LED 1 "Operation"
LED flashes evenly (System ramp-up)
LED flashes short on, long off,
(Operation display, system is functional)
LED flashes short on, long off ...
(Programming mode active)
LED always on
(Plug+play programming is active)
Display LED 2 "Error"
LED flashes long on, short off ...
(Own address incorrect)
LED flashes long on, short off, short
on, short off, long on ...
(More than 31 devices in the line)
LED remains alight
(Address error at other BNGs)
LED flashes evenly
More than one ZBVG 650-... unit
plugged into a multiple-line system
6
0,3s 0,3s 0,3s 0,3s 0,3s 0,3s
1s 20ms 1s
0,3s
2s
2s
2s
0,3s 0,3s 0,3s 0,3s 0,3s 0,3s
0,3s 0,3s 0,3s 0,3s 0,3s 0,3s
20ms 1s 20ms
0,3s 2s
0,3s 2s
0,3s
0,3s 0,3s
0,3s 0,3s 0,3s 0,3s 0,3s 0,3s
0,3s 0,3s 0,3s etc.
etc.
0,3s etc.
etc.
etc.
2s
0,3s 0,3s 0,3s
etc.