Power Section - dB Technologies VIO S318 Caractéristiques Techniques

English

POWER SECTION

14. "MAINS INPUT" POWER CONNECTOR
Compatible with powerCON TRUE1® connector, the power supply features an auto-range function. The
operating voltage is automatically acknowledged (ranges: 100-120V~ or 220-240V~). With rubber closing
protection (shown in the figure). For simplicity, this protection will no longer be shown in this manual.
15. "MAINS LINK" POWER DAISY CHAIN
Compatible with powerCON TRUE1® connector for power daisy chain to other modules.
With rubber closing protection (shown in the figure). For simplicity, this protection will no longer be shown in
this manual. To know the maximum number of elements in a daisy chain system, refer to section
SPECIFICATIONS.
WARNING
• The connectors of this section are also used as power switches.
• Do not obstruct the rear heat sinks of the amplifier. If the module heats up excessively,
the audio volume is gradually reduced until VIO-S318 is thermally stabilised. The audio
is automatically restored when the normal operating temperature is reached.
• Do not try in any way to open the amplifier.
• In the event of malfunction, immediately turn off the power by disconnecting the
module from the power grid and contact an authorized technician.
• It is preferable to use high quality cables equipped with original Neutrik® connectors.
Check their integrity regularly.
VIO-S318
!
TECHNICAL
Cod. 420120244 REV. 1.1
37