Mechanics - dB Technologies VIO S318 Caractéristiques Techniques

English

MECHANICS

Subwoofer ergonomics and the quick mounting in multiple configuration are ensured by:
SIDES [view A]
1) Vertical handles (2 per side). Make lifting easier when the subwoofer is in horizontal position.
2) Horizontal handles (2 per side). Make handling easier, for example when subwoofer needs to be rotated.
3) Roping points (2 per side).
4) Plastic feet (4 on one side) for use in vertical configuration (for this kind of use it is necessary to properly fasten it
using the appropriate mechanical means, not supplied).
UPPER SIDE [view B]
5) Cable tracks. Allow sliding cables between the subwoofers for a neat and simple wiring in cardioid configuration.
6) Holes for DRK-210 fly bar mounting.
7) Resting points for lower feet [8]. Allow a stable positioning of several stacked VIO-S318.
BACK AND LOWER SIDE [view C]
8) Rain cover. Protects amplifier against water, allowing to use it even under critical weather conditions. For
simplicity, it will no longer be shown in this manual.
9) Wheel seats (4 in total). For SWK-18 kit assembly (see ACCESSORIES).
10) Cable tracks (2 on the bottom side). Allow sliding cables under the subwoofer for a neat and simple wiring in
cardioid configuration.
11) Lower feet (4 in total). For a stable support and, when inserted inside seats [11], allow the configuration with
stacked subwoofers.
VIO-S318
Cod. 420120244 REV. 1.1
32