dB Technologies VIO S318 Caractéristiques Techniques page 41

English
• Once the different parameters have been
calculated with DBTECHNOLOGIES COMPOSER,
transfer the values on the controls present on the
amplifier panel.
• In case of remote control with RDNet
connections, all subwoofer parameters can
be controlled with the free DBTECHNOLOGIES
NETWORK free software. It can be downloaded
from the DOWNLOAD section at www.
dbtechnologies.com. For further information,
refer to the software complete manual.
• Even in case of remote control, it is good practice
to repeat the project initial values calculated with
DBTECHNOLOGIES COMPOSER on the VIO S318
amplifier panel before proceeding with the final
installation.
ATTENZIONE
• When VIO-S318 is controlled via RDNet
with DBTECHNOLOGIES NETWORK,
the local settings on the subwoofer
control panel are by-passed.
Last settings stored on VIOS318 (using DBTECHNOLOGIES NETWORK software), can be
recalled later on the speaker, without RDNet remote control. To do this, turn the rotary
Xover on Service/User position.
VIO-S318
!
Cod. 420120244 REV. 1.1
41