Nuova Simonelli Master coffee 1 Manuel D'instructions page 37

To exit the dose programming function,
press RESET the display will read MACHI-
NE READY).
MILK DOSE PROGRAMMING: This function
allows to programme the time for cappucci-
no, white coffee and hot milk. Insert the U-key
to enable programming and move the arrow
key until the display reads MILK DOSE
PROG. Select the dose to be programmed,
when the desired dose has been delivered,
press (follow the same procedure for
the other doses). In the SELF SERVICE ver-
sion once the desired has been delivered,
press the selected key a second time.
To exit the dose programming function,
press RESET (the display will read MACHI-
NE READY).
PROGRAMMING GRINDING TIMES: This
function allows you to programme grinding
times for the different selections possible.
Insert the U-key to enable programming and
move the arrow key until the display reads
GRINDING TIME. Select the key for the
time you wish to set (programmed grinding
times are shown on the top line of the
display); increase or reduce the time using
the arrow keys and press the ENTER
key to confirm the time set. To exit the
GRINDING TIME function, press RESET
the display will read MACHINE READY).
INSTALLATION: This page contains the fol-
lowing functions:
AUTO WASHING: This function automatical-
ly washes the milk foamer at the end of each
delivery of cappuccino, white coffee and hot
milk. This washing cycle function can be pro-
grammed.
CAPPUCCINO PRODUCTION: Offers the
opportunity to make cappuccino choosing
whether to deliver coffe first and then milk or
vice versa.
DOUBLE CYCLE: This function allows you
to select the delivery of 2 cups of coffee in
one cycle (SINGLE CYCLE) or in 2 cycles
(DOUBLE CYCLE).
DATE-TIME: To set or change the day of the
week or the time.
PROGRAM ON-OFF: To set the times for
the machine to switch on - off automatically
as well as to set the weekly day off.
DISCHARGE TIME: This function allows you
to programme the drying time for the coffee
grounds after delivery.
DISCHARGE OPTION: This function allows
you to programme the machine according to
the type of container which will be used to
hold the discharged tablets of coffee
grounds (standard internal container or
external container). In the first case (stan-
dard internal container), it is also possible to
programme the maximum number of
grounds (min. 20, max. 40), while in the
second case (external container), the num-
ber is fixed at 200.
CHOOSE LANGUAGE: This function allows
you to choose the language used on the
LCD display.
MANUAL STOP: In the SELF SERVICE ver-
sion, this function enables to stop delivery of
coffee by pushing the same button.
STANDARD PROG.: This page contains the
following functions:
COFFEE DOSES: To set the standard
quantity of water for coffee delivery and the
hot water delivery times.
MILK TIMES: To set the standard delivery
times for cappuccino, white coffee and
warm milk.
DISCHARGE AND GRINDING TIMES: To set
the standard discharge and grinding times.
VARIOUS SETTINGS: To program the
standard number of continuous deliveries,
milk washing times, washing times, single
and double cycle settings, English langua-
ge option and the number of coffee
grounds for discharge drawer management
Insert the U-key to enable programming and
move the arrow key until the display reads
INSTALLATION. Press ENTER and use the
arrow keys to choose from the options:
AUTO WASHING, CAPPUCCINO PRO-
DUCTION, DOUBLE CYCLE, DATE-TIME,
PROGRAMM. ON-OFF, DISCHARGE
TIME, DISCHARGE OPTION, CHOOSE
LANGUAGE, MANUAL STOP, PROG.
STANDARD.
AUTO WASHING: Press ENTER and use
the arrow keys to set the desired time
(min. 0.5 seconds, max. 5 seconds).
To confirm this setting, press ENTER. To
return to the INSTALLATION function, press
RESET and to exit the programming function
press RESET (the display will read MACHI-
NE READY).
CAPPUCCINO PRODUCTION: Press
ENTER, then by means of
choose between the options COFFEE
MILK or MILK COFFEE. Press ENTER to
confirm. To return to the INSTALLATION
function, press RESET and to exit the pro-
gramming function press RESET again (the
display will read MACHINE READY).
DOUBLE CYCLE: Press ENTER and use
the arrow keys to choose from the
options 2 COFFEE WITH DOUBLE CYCLE
or 2 COFFEES WITH SINGLE CYCLE. To
confirm this setting, press ENTER.
To return to the INSTALLATION function,
press RESET and to exit the programming
function press RESET again (the display will
read MACHINE READY).
you can
33