Philips HR2831/00 Mode D'emploi page 4

Mounting and unmounting the motor unit
and cover
2
4
- Ensure that the control ring is set to position
Please note: Damage may occur if the control ring is
not in this position while opening or closing.
- Place the lid on the bowl (fig. 3).
- Place the motor unit on the cover (fig. 4).
- Turn the control ring to position
6
- To release the motor unit and lid turn the control
1
ring to position (fig. 6, 7).
Food chute and pusher
• Use the pusher to feed
ingredients through the
food chute (fig. 8).
• You can keep the pusher
in the food chute to
serve as a stopper while
operating. This will
prevent splashing and
making dust.
• During operation you
may remove the pusher from the filling opening to
add ingredients.
3
5
1
(fig. 2).
2
O/M (fig. 5).
7
8
9
- At the bottom side of the pusher you will find an
indication where you can pierce a small opening,
using a pointed object (fig. 9). Through this opening
you can from time to time add small quantities of
liquid (e.g oil while making mayonnaise) (fig. 10).
- There are level indications (ml) on the the pushing
guide for measuring liquids.
Chopping, mixing, blending and puréeing with
£
the metal blade
• Take care: the cutting edges are very sharp!
11
- Remove the protective cap from the metal blade
before use (fig. 11-12).
• Always hold the unprotected metal blade by
its handle.
13
- First position the coupler (fig. 13) and the metal
blade (fig. 14).
5
10
12
14