Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Presetting Stations Manually
1
Select the radio band and tune in a desired
radio station you wish to store in the preset
memory.
2
Press and hold, for at least 2 seconds, any
one of the preset buttons (1 through 6)
into which you wish to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
• A total of 18 stations can be stored in the preset memory
(6 stations for each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already
has a station, the current station will be cleared and
replaced with the new station.
Presetting Stations Automatically
1
Press BAND repeatedly until the desired
radio band is displayed.
2
Press and hold TUNE/A.ME for at least 2
seconds.
The frequency on the display continues to change while
the automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into preset buttons 1
to 6 in order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in preset location No.1.
• If no stations are stored, the tuner will return to the
original station you were listening to before the auto
memory procedure began.
Tuning to Preset Stations
1
Press BAND repeatedly until the desired
band is displayed.
2
Press any one of the station preset buttons
(1 through 6) that has your desired radio
station in memory.
The display shows the band, preset number and
frequency of the station selected.
Frequency Search Function
You can search for a radio station by its frequency.
1
Press
/ESC in Radio mode to activate
Frequency search mode.
2
Turn the Rotary encoder to select the
desired frequency.
3
Press Rotary encoder to receive the
selected frequency.
• Press
/MUTE in the search mode to cancel. Or, the
search mode will be canceled if no operation is
performed for 10 seconds.
9
-EN
Publicité
Chapitres
Table des Matières
