Connecting The Gas Lines; Connecting The Electrical - Dometic CRG 3000 Serie Manuel D'installation Et D'utilisation

Installation
6. Lift the rear of the cooktop and slide it to the rear of
the range until the tabs clear the console.
q
w
7 Removing the Cooktop
Cooktop
q
7. Lift the cooktop out of the range and place it on a flat,
secure surface.
8 Sliding the Range into the Cabinet Opening
8. Gently push the range into the cabinet opening.
9. Verify the range is level (side to side, front to rear).
8
Range
w

7.2 Connecting the Gas Lines

q
w
9 Placing the Gas Line
Gas Regulator
q
1. Turn off all gas to the RV.
2. Connect a gas supply line to the gas regulator in the
upper-left rear corner of the cooktop.
I All openings in the cabinetry around the gas supply
line must be closed at the time of installation.

7.3 Connecting the Electrical

I Applies to the CRG 3335 model only.
1. Turn off all power to the RV.
2. Make the connections. See "Wiring Diagram" on
page 4.
– Connect the red wire to the positive 12 VDC
power circuit.
– Connect the black wire to the negative 12 VDC
power circuit.
CRG 3000 Series Range
Gas Supply Line
w
EN