Placing The Range - Dometic CRG 3000 Serie Manuel D'installation Et D'utilisation

CRG 3000 Series Range

WARNING: PROJECTILE HAZARD.
This range must be permanently installed. Failure
to secure the range permanently could result in the
range becoming airborne in the occupant space of
the vehicle in the event of an accident, creating a
risk of serious blunt force injury.

CAUTION: ELECTRICAL SHOCK HAZARD.
Be sure to label all wires before removing or
servicing the range. Failure to obey this caution
could result in minor or moderate injury.
This section provides information on placing the range,
connecting the lines, and leak testing.
The example images in this section show the
I
CRG 3335 model.

7.1 Placing the Range

4 Opening the Glass Bi-Fold Cover
Glass Bi-Fold Cover
q
1. Remove the range from the packaging.
2. If the range has a glass bi-fold cover, open it by lifting
the cover straight up and folding the front section of
the cover over and behind the back section of the
cover.
EN
5 Removing the Grate
q
q
3. Lift the grate up and off of the range and place it on a
flat, secure surface.
4. Remove the four screws that hold the cooktop and
glass bi-fold cover in place. Keep for reinstallation.
6 Tilting the Cooktop
q
e
5. If the range has a glass bi-fold cover, carefully lower it.
q
Grate
q
e
e
Glass Bi-Fold Cover
Tabs
Installation
w
Glass Bi-Fold Cover
w
w
Cooktop
w
7