Reely 2182212 Mode D'emploi page 6

Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical Data
Number of NiCd/NiMH cells .................. 6 – 7
Number of LiPo cells ............................ 2
Number of LiFe cells ............................. 2
Limiter revolutions ................................ 15 turns
Pulse frequency .................................... 1 KHz
Operating temperature ......................... 0°C to +40°C
BEC ...................................................... 5 V= 1 A (permanent), max.1.5 A (transient)
Receiver connection ............................. JR connector system
Functions .............................................. Proportional forward, brake, proportional reverse
Undervoltage protection ....................... Auto = 70% of the determined voltage
5.4 V (NiMH/NiCd)
6.0 V (LiPo, 2-cell)
4.8 V (LiFe, 2-cell)
Overtemperature protection .................. Switching off at approx. 95 °C
Start-up protection ................................ Yes
Steady current forwards 5 min .............. 75 A At 6.6 V (500 Watt)
Constant current forwards 30 sec. ........ 80 A At 6.6 V (528 Watt)
Constant current forwards 1 sec. .......... 106 A At 6.6 V (700 Watt)
Constant current (reverse) .................... 50% of forwards
Steady current forwards 5 min .............. 68 A At 7.4 V (500 Watt)
Constant current forwards 30 sec. ........ 71 A At 7.4 V (528 Watt)
Constant current forwards 1 sec. .......... 95 A At 7.4 V (700 Watt)
Dimensions (L x W x H) ........................ approx. 36 x 36 x 28 mm
Weight .................................................. approx. 50 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE. *2182212_V1_max_1019_m_en