Cleaning Metal Grease Filters; Replacing Activated Charcoal Filter - Faber TRATIS36SS600-B Instructions D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Cleaning metal grease filters
The filters must be cleaned every 2 months of operation, or more
frequently for particularly heavy usage, and can be washed in
a dishwasher.
• Remove the Filters one at a time, pushing them towards
the back of the unit and at the same time pulling downward.
• Wash the Filters without bending them, and leave them to
dry completely before replacing. (If the surface of the filter
changes color as time goes by, this will have absolutely no
effect on the efficiency of the filter itself.)
• Replace, taking care to ensure that the handle faces forwards.

Replacing Activated Charcoal Filter

The filter is not washable and cannot be regenerated, and must
be replaced approximately every 4 months of operation, or more
frequently for particularly heavy usage.
• Remove the Filters one at a time, pushing them towards
the back of the unit and at the same time pulling downward.
• Remove the saturated charcoal filter by releasing the fixing
hooks.
• Fit the new filter and fasten it in its correct position.
• Replace, taking care to ensure that the handle faces forwards.
Lighting Unit
• LED lights must be replaced by Faber factory authorized
service.
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tratto is 36

Table des Matières