Phocos CML-V2 Guide De L'utilisateur page 32

With these jumpers, the following settings can be configured:
Jumper
Function
Setting
jumper open
Setting jumper
closed
Factory
setting
After completing the setting, replace the cover and tighten it with
the screws.
GEL (1)
Battery type
Liquid
electrolyte
GEL (VRLA
battery)
Jumper open
(liquid
electrolyte)
30
For changing, put the jumper
either on both contact pins or
only on one contact pin:
LVD (2)
Function of low
voltage disconnect
State of charge
controlled
Voltage controlled
Jumper open
state-ofcharge
controlled
Closed jumper
Open jumper
BUZ (3)
Acoustic alarm
signal
Alarm off
Alarm on
Jumper closed
Alarm on