Phocos CML-V2 Guide De L'utilisateur page 22

Your new CML controller is a state-of-the art device which was
developed in accordance with the latest available technical
standards. It comes with a number of outstanding features, such
as:
Clear, readable display of the state of charge
Acoustic signal when the state of charge changes
Low voltage disconnect regulated by state of charge or voltage
16 mm 2 connector clamps
Complete electronic protection
Please read this manual carefully taking special note of the safety
and usage recommendations at the end. The manual gives important
recommendations for installing, using and programming as well
as a troubleshooting guide for potential problems with the controller.
Description of Functions
The charge controller protects the battery from being overcharged
by the solar array and from being deep discharged by the loads.
The charging characteristics include several stages which include
automatic adaptation to the ambient temperature.
The charge controller adjusts itself automatically to 12V or 24V
system voltage.
The charge controller has a number of safety and display
functions.
20