Trix H0 22966 Mode D'emploi page 13

CV Discription
1 Address
2 PoM Minimum Speed
3 PoM Acceleration delay
4 PoM Braking delay
5 PoM Maximum speed
8 Factory Reset / Manufacturer Recognition
13 PoM Functions F1 - F8 in analog operation
14 PoM Functions F9 - F15 and lights in analog operation
17 Extended address (upper part)
18 Extended address (lower part)
19 Multiple Unit Address
21 PoM Functions F1 - F8 on Multiple Unit
22 PoM Functions F9 - F15 and lights on Multiple Unit
Bit 0: Reversing direction of travel
Bit 1: Number of speed levels 14 or 28/128*
29 PoM
Bit 2: DCC operation with a braking area (no analog operation
possible)
Bit 5: short / long address
63 PoM Volume
* The speed levels on the locomotive decoder and on the controller must agree with each other; otherwise,
you may have malfunctions.
DCC Value
1 – 127
0 – 255
0 – 255
0 – 255
0 – 255
8
0 – 255
0 – 255
CV 29, Bit 5 =1
CV 29, Bit 5 =1
0 – 255
0 – 255
0 – 255
0 / 1
0 / 2 0, 1, 2, 3, 4, 5, 6,
0 / 4 7, 32, 34, 35, 36,
37, 38, 39
0 / 32
0 – 255
Factory-Set
3
10
12
12
255
131
1
1
192
128
0
0
0
6
255
13