Telecom Behnke 20-0001E Mode D'emploi page 36

Anleitung Türstationen a / b Serie 20 / 40 / 50
UK GB
Configurations and Set-up
Code Parameter
Reset and restore default settings:
00 * * * *
Change security code: Default: 0 0 0 0
01 new code [beep] new code
Be sure to keep the new security code in a suitable place. Operation is
not possible without a security code.
Answering the telephone call when the doorbell was rung: Default: 1
03 0 = automatically with manual confirmation via DTMF signal 0-9
(cf. Configuration step 9910)
1 = automatically
Connection interval: Default: 3
05 0 = unlimited (i.e. limited to approx. 8 hours)
1 = limited to 1 minute
9 = limited to 9 minutes
Volume: Default: 3
06
1 = soft
5 = loud
36
Confirmation
#
#
#
#
#
#
#
#
#
www.behnke-online.com