Abus Eyseo TV7220 Instructions D'installation page 67

Post data:
fimage=<file name>[&return=<return page>]\r\n
\r\n
<multipart encoded form data>
Server will accept the upload file named <file name> to be upgraded the firmware and return with
<return page> if indicated.
IP filtering
Note: This request requires administrator access privilege
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?
method=<value>&[start=<ipaddress>&end=<ipaddress>][&index=<value>]
[&return=<return page>]
PARAMETER VALUE
Method addallow
adddeny
deleteallow
deletedeny
start <ip address>
end <ip address>
index <value>
return <return page>
DESCRIPTION
Add a set of allow IP address range to server. Start and
end parameters must be specified. If the index parameter
is specified, it will try to add starting from index position.
Add a set of deny IP address range to server. Start and
end parameters must be specified. If the index parameter
is specified, it will try to add starting from index position.
Remove a set of allow IP address range from server. If
start and end parameters are specified, it will try to remove
the matched IP address. If index is specified, it will try to
remove the address from given index position. [start, end]
parameters have higher priority then the [index] parameter.
Remove a set of deny IP address range from server. If start
and end parameters are specified, it will try to remove the
matched IP address. If index is specified, it will try to
remove the address from given index position. [start, end]
parameters have higher priority then the [index] parameter.
The start IP address to add or to delete.
The end IP address to add or to delete.
The start position to add or to delete.
Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or
67