audioin_codec
audioout_codec
camctrl_httptunnel
uart_httptunnel
transmission_mode
network_wire
network_wireless
wireless_802dot11b
wireless_802dot11g
wireless_encrypt_wep
wireless_encrypt_wpa
wireless_encrypt_wpa2
Group: event_i<0~2>
PARAMETER
name
enable
priority
<a list of the
available codec
types separaters
by comma)
<a list of the
available codec
types separaters
by comma)
<boolean>
<boolean>
Tx,
Rx,
Both
<boolean>
<boolean>
<boolean>
<boolean>
<boolean>
<boolean>
<boolean>
VALUE
SECURITY
(get/set)
string[40]
6/6
0, 1
6/6
0, 1, 2
6/6
0/7
available codec list
0/7
available codec list
0/7
Indicate whether to support the http
tunnel for camera control
0/7
Indicate whether to support the http
tunnel for uart transfer
0/7
Indicate what kind of transmission
mode the machine used. TX: server,
Rx: receiver box, Both: DVR?.
0/7
Indicate whether to support the
Ethernet
0/7
Indicate whether to support the
wireless
0/7
Indicate whether to support the
wireless 802.11b+
0/7
Indicate whether to support the
wireless 802.11g
0/7
Indicate whether to support the
wireless WEP
0/7
Indicate whether to support the
wireless WPA
0/7
Indicate whether to support the
wireless WPA2
DESCRIPTION
The identification of this entry
To enable or disable this event.
Indicate the priority of this event.
"0" indicates low priority.
"1" indicates normal priority.
"2" indicates high priority.
58