Publicité
Les langues disponibles
Les langues disponibles
EN
Connecting ÉPIX™ Products to the Power Supply
The ÉPIX™ Drive 642 uses an RJ45 data connection to link all data ports. You can
connect either 4- ÉPIX™ strips or 1- ÉPIX™ Bar per output on the ÉPIX™ Drive 642.
The following diagram illustrates how to assemble the data connections.
Each port of ÉPIX™ Drive 642 can support 1 pc. ÉPIX™ Bar 2.0 or 4 pcs. ÉPIX™ Strip
2.0. Make sure the total length of the connecting network cables (RJ45) does not
exceed 10 meters.
7
ÉPIX™ Drive 642 QRG
Total
length of
cables
cannot
exceed
10 m
Total
length of
cables
cannot
exceed
10 m
Publicité
