Publicité
Les langues disponibles
Les langues disponibles
ÉPIX™ Drive 642 QRG
Safety
Notes
Read all the following Safety Notes before working with this product.
These notes include important information about the installation,
usage, and maintenance of this product.
This icon indicates critical installation, configuration, or
operation information. Failure to comply with this
information may render the fixture partially or
completely inoperative, damage third-party equipment,
or cause harm to the user.
There are no user-serviceable parts in this product. Any
reference to servicing in this guide applies only to
properly certified CHAUVET® technicians. Do not open
the housing or attempt any repairs unless you are
certified by CHAUVET®.
This icon indicates useful, although non-critical
information.
·
DO NOT open this product. It contains no user-serviceable
parts.
·
CAUTION: This product's housing may be hot when lights are
operating.
·
Mount this product in a location with adequate ventilation, at
least 20 in (50 cm) from adjacent surfaces.
·
DO NOT leave any flammable material within 50 cm of this
product while operating or connected to power.
·
This product is for indoor use only! To prevent risk of fire or
shock, do not expose this product to rain or moisture.
·
DO NOT connect this product to a dimmer or rheostat.
·
ONLY connect this product to a grounded and protected
circuit.
·
Always make sure you are connecting this product to the
proper voltage, as per the
guide or on the product's specification label.
·
Do not operate this product if you see damage on the housing,
I/O ports, or cables. Have the damaged parts replaced by an
CHAUVET® certified technician at once.
·
Do not cover the ventilation slots when operating to avoid
internal overheating.
·
The maximum ambient temperature is 104 °F (40 °C). Do not
operate this product at a higher temperature.
·
In case of a serious operating problem, stop using this product
immediately!
Technical Specifications
2
EN
in this
Publicité
