Black 1-9/16" Flat Head Screw - Sauder 415109 Instructions De Montage

Step 24
1
D87
V
Groove
Insert the DRAWER SIDES (D88 and D87) at an angle
å
into the slot at each end of the DRAWER FRONT (V).
3
Fasten the DRAWER BACK (D78) to the DRAWER SIDES (D88
å
and D87). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).
NOTE: Be sure the DRAWER BOTTOM (D708) inserts into the
å
groove of the DRAWER BACK (D78).
Repeat this step for the remaining drawers.
å
www.sauder.com/services
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D88
D78
D87
D708
VIEW THE T-LOCK BOX VIDEO
2
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D708) into the grooves in the
å
DRAWER SIDES (D88 and D87) and DRAWER FRONT (V).
Start each screw a few turns before
completely tightening any of them.

BLACK 1-9/16" FLAT HEAD SCREW

D88
415109
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
U n
fi n
s u
i s h
r f a
e d
c e
D708
D87
D88
V
30S
(12 used in this step)
Page 29