Publicité
Step 30
To insert the small drawers into your unit, tip the front of the drawer down and drop the rollers on the drawer
å
behind the rollers on the unit. Lift the front of the drawer up and slide it into the unit. Repeat this step to insert the
KEYBOARD SHELF (U).
To insert the large drawer into your unit, line up the EXTENSION SLIDES on the drawer with the EXTENSION RAILS
å
on the unit and push the drawer into the unit until the drawer is fully inserted. The drawer will push in hard until it is all
the way in, then it will slide in and out easier.
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations of your
å
choice in the UPRIGHTS (E and F). Set the ADJUSTABLE SHELF (R) onto the METAL PINS.
U
25 lbs.
www.sauder.com/services
15 lbs.
7 lbs.
7 lbs.
75 lbs.
F
R
25 lbs.
E
40 lbs.
Place the roller on the SLIDE
behind the roller on the RAIL.
415109
10 lbs. ea
35 lbs.
1R
(4 used)
2R
Page 35
Publicité
